Prices are in US Dollar and we ship Worldwide

 

                               

Billet Aluminum Camber / Caster Plates.  By adjusting the caster and camber you will make a big improvement in the handling of your car. These amazing plates feature a billet aluminum outer with an anodized blue finish. Centers are hardened steel with a cadmium plating. They use spherical bearings for ultra precise response. You can adjust them from -2 to + 1 on the camber and 1 +/- on the caster. Plates have laser etched mark's for precise adjustments. These also work with our coil over suspension kit below.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$289.00

 


 

                                       

Polyurethane Bushings for the FRONT control arms. The kit includes 4 bushings for the front control arms. They replace the inner and outer bushings. Handling is greatly improved and ride quality is maintained.

Fitment : All N. American 1989-1994 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$99.00

 
 

 

                                       

Polyurethane Bushings for the REAR control arms. The kit includes 4 bushings for the rear control arms. They replace the inner and outer bushings. Handling is greatly improved and ride quality is maintained.

Fitment : All N. American 1989-1994 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$99.00


                                      

Polyurethane Castor Kit for the FRONT control arms. The kit includes 4 bushings for the front control arms. They replace the inner and outer bushings. Handling and stability are greatly improved. Ride quality is maintained. By increasing the Swift's caster you improve high speed stability and the car will track much better. With this kit you do not need the Polyurethane front bushing kit that is listed above. 

Fitment : All N. American 1989-1994 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$139.00

 
 

                                

                                

Polished Rear Strut Tower Brace. Greatly reduces chassis flex during hard corners. Made out of Aluminum. Very light weight and strong. The end pieces are CAD plated. Easy bolt on installation.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$149.00


 

 

Polished Front Strut Tower Brace. Greatly reduces chassis flex during hard corners. Made out of Aluminum. Very light weight and strong. End pieces are CAD plated. Easy bolt on installation.

Fitment : All N. American 1989-1999 Swift GTi / GT's, 1989-1994 Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$169.00

    


                                      

19mm High performance rear sway bar. Greatly improves handling balance and stability. Includes polyurethane mounts. Easy installation.

Fitment : All N. American 1989-1991 Swift / GTi / GT's & 1989-1991 Overseas Swift GTi/GT's.

$199.00

 


                                  

                                      

20.5mm High performance rear sway bar for the '92-'99 Swift GTi/GT's. Greatly improves handling balance and stability. Includes polyurethane mounts. Easy installation.

Fitment : All N. American 1992-1994 Swift GT's & 1992-1999 Overseas Swift GTi/GT's.

$199.00

 


 

                                 

The ultimate adjustable coilover suspension kit for your Swift. It has been track tested and uses the finest German suspension components. It is specifically designed for the car and the shocks and springs are perfectly matched to each other. Thus you get the best handling and ride possible. The shocks/struts are cad plated to a gold/chrome like finish and the springs are power coated titanium. The front shocks have anodized red adjustable perch's made from billet aluminum and can be adjusted to any height. The rears are fixed due to AA34 chassis design and lower the car 45mm. Whether you race your car or drive it on the street, this is the kit to use. Full instructions are included and the kit comes with 2 adjustable wrench's. Our caster/camber plates above work great with this suspension.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$1199.00

 


 

                                           

Front adjustable camber kit for all 1989-2002 model Swift's, Metro's, Firefly's and Sprints. Easy installation and allow +/- 1 degree of camber changes to be made. Complete instructions included.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$49.00


 

                                   

Progressive sport lowering springs. Lowers your car 40mm (1.6") over stock. 20% stiffer over the original springs. Greatly improves looks and handling. These are the best springs we've  come across.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$249.00 - Out of Stock


 

                                     

Front Sway Bar Link Urethane Bushings. These 4 bushings replace the stock soft rubber swaybar link bushings. Improves the performance of your swaybar. Easy to install.

Fitment : All N. American 1989-2002 Swift / GTi / GT's, Metro's, Firefly's, Sprint's & 1989-2002 Overseas Swift's.

$29.00


 

                                     

Rear Sway Bar Link Urethane Bushings. These 4 bushings replace the stock soft rubber swaybar link bushings. Improves the performance of your swaybar. Easy to install.

Fitment : All N. American 1989-1994 Swift / GTi / GT's, & 1989-2002 Overseas Swift GTi's.

$29.00


 

                                   

24.5mm High performance Front Sway Bar for the '89-'91 Swift GTi/GT's. Greatly improves handling balance and lessens body roll. Comes with polyurethane mounts. Easy installation.

Fitment : All N. American 1989-1991 Swift / GTi / GT's & 1989-1991 Overseas Swift GTi/GT's.

$199.00


 

                                   

27.5mm High performance Front Sway Bar for the '92-'99 Swift GTi/GT's. Greatly improves handling balance and lessens body roll. Comes with polyurethane mounts. Easy installation.

Fitment : All N. American 1992-1994 Swift GT's & 1992-1999 Overseas Swift GTi/GT's.

$199.00

 

Accessories | Brakes | Engine | Exterior | Interior | Suspension || Contact Us | Currency | Home | © SSGTi